Guangzhou OSUNSHINE Environmental Technology Co., Ltd 86-020-38246006  info@ozocenter.com
1kg 2kg Large Ozone Generator With Oxygen Feeding For Industrial Water Treatment

1kg 2kg Large Ozone Generator With Oxygen Feeding For Industrial Water Treatment

  • हाई लाइट

    high output ozone generator

    ,

    longevity ozone generators

  • Ozone output
    1Kg/h 1.6 Kg/h 2Kg/h 5Kg/h
  • material
    ozone enamel tube
  • application
    Waste water treatment,air cleaning,etc.
  • Gas source
    Pure oxygen or enriched-oxygen
  • MOQ
    1 set
  • Cooling way
    Water cooling
  • Ozone produced method
    Corona discharge
  • Place of Origin
    Guangdong China
  • ब्रांड नाम
    Netech
  • Model Number
    NT-DGY
  • Minimum Order Quantity
    1 set
  • मूल्य
    for futher discussion
  • Packaging Details
    Safe double carton package with foam inside for protection
  • Delivery Time
    40 days after payment confirmed
  • Payment Terms
    L/C, T/T
  • Supply Ability
    1000 sets per month

1kg 2kg Large Ozone Generator With Oxygen Feeding For Industrial Water Treatment

1kg 2kg Large Ozone Generator With Oxygen Feeding For Industrial Water Treatment
 
 
1.Applications
Ozone be used in chemical, petroleum, papermaking, textile, fine chemical and flavors and fragrances industry as the oxidant, catalyst.
 
Its super-oxidation capacity and easy to cut off the associative key of Alkenes, Alkynes, and Benzene organics, increase the process oxidation, synthesis of new compounds.
 
Recently years, ozone is widely used in industrial sewage water treatment as it has the ability of high kill rate of bacteria, viruses and other microorganisms with high speed, and complete removing the organic compounds and other pollutants without creating secondary pollution, also can reduce the biological oxygen demand (BOD) and chemical oxygen demand (COD), remove nitrite, suspended solids and decolorization in water.
 
2Technical Description
1. Use enamel tubes for the core parts of ozone generator.
 
2. In order to ensure the safety and continuously operating of ozone discharge, each discharge cell is equipped with separated safety appliance. Single discharge unit failure does not affect the normal operation of other units.
 
3. Discharge chamber
1. Use stainless steel for the case, resistant to rust & corrosion, and can effectively prevent the cooling water fouling.
 
4. High frequency of power supply
1. Precise setting the Voltage and Working frequency. Output frequency resolution can be up to ± 0.1Ht. Voltage Precision ±1V.
2. Has a perfect overload, automatic current-limiting, overpressure, short circuit, lack of phase and power-off protection.
3. SPWM modulation technology. Power factor COSθ can be 0.9.
 
5. High voltage transformer

1. Using Mn-Zn ferrites for magnetic core. Small wastage of iron core / low Resistivity / low temperature coefficient / high rate of dynamic permeability under high frequency working condition.

2. Using special cables of high frequency & stranded conductor to reduce the skin effect of high-frequency current.

 
NT-DY1.0 Ozone System Technical Parameters:
 

Item

NT-DY1.0  Ozone Generator

Ozone Output

1Kg/ Hr

Input Power

Three- phases AC power source

Operating Voltage

3-5KV

Working Frequency

800-5000 Hz

Ozone Power

8-10KW/h•KgO3

Ozone Concentration

80-120mg/Hr

Intake gas Flow

10-13M3/h•KgO3

Air Source Dew Point

≤-45℃

Working Gas Pressure

0.05-0.16Mpa

Inlet Air Temperature

≤20℃

Cooling Water Temperature

≤30℃

Cooling Water Temperature Rise

4-6℃

Cooling Water Flow

1.7-2 M3/h•KgO3

 

 

NT-DGY 1.6 Ozone System Technical Parameters:

 

Item

NT-DGY1.6 Ozone Generator

Ozone Output

1.6KG/Hr

Power Supply Voltage

380  3PH  50HZ

Power

15.8 KW/HKGO3

Operating Voltage

3800V-4200V

Working Frequency

800 Hz

Ozone Concentration

80-110MG/L

Oxygen Feed Flow Rate

12-15 NM3/HKGO3

Air Source Dew Point

≤-45℃

Working Pressure of Discharge chamber

0.05-0.1Mpa

Outlet Air Temperature

≤30℃

Inlet Cooling Water Temperature

≤20℃

Cooling Water Temperature Rise

4-6℃

Cooling Water Flow

2-2.5M3/HKGO3

 

Remark:

1.Different working condition there will be10%-20% different of ozone capacity.

2.Kg ozone machine configuration can be custom-made according to customers demand

3.KG ozone generator also popular used in Jeans color fading area.
 
1kg 2kg Large Ozone Generator With Oxygen Feeding For Industrial Water Treatment 0
1kg 2kg Large Ozone Generator With Oxygen Feeding For Industrial Water Treatment 1
 
What we do?
We Provide high-quality ozone generator for : Ozone generator wholesalers
Retailers and online shops
OEM-The custom-made ozone generator are available. Upon customer's idea,
drawings, photos etc.
ODM-The modification of the ozone generator after customer's selection is
accepted.
 
Excellent after-sales service:
1 year warranty again the manufacture defect, offer life time consultation on
problems occurred.
Report on the making process. Marketing feedbacks tracing.
1kg 2kg Large Ozone Generator With Oxygen Feeding For Industrial Water Treatment 2